Brake Bleeder Hose - One Way Check Valve Tube Bleeding Tool Kit For Hydraulic System Bleeding
Brake Bleeder Hose - One Way Check Valve Tube Bleeding Tool Kit For Hydraulic System Bleeding
Couldn't load pickup availability
🚘🏍️If your brake bleed kit hose has started to age or crack, this will be the perfect replacement! 🔧💥
【One Way Valve Design】: The brake bleeder kit adopts a one-way check valve design to prevent air and dust from entering the system during use, ensuring internal cleanliness. The clutch bleeder kit is also equipped with a valve clamp to prevent oil leakage during exhaust and disassembly.
【Durable & Sealed】: The car brake bleeder tube is made of high-quality aluminum and rubber; The aluminum body can resist brake fluid corrosion, and the easy-to-bend hose can easily adapt to various complex brake system layouts and installation requirements, with excellent sealing performance.
【Easy to Operate】: The installation of this brake bleeder one-way valve is relatively simple and can be easily done by one person. First, connect the product using two tubes, one valve, and three clamps. Release the brake bleeder and press the brake lever. Finally, fill up the reservoir.
Step1: Open
1. Open the brake bleeder nipple of the caliper
Step2: Connect the Hose
1. Place one end of the vbaxy hose onto the bleed nipple and secure with hose clip(only recommend)
2.remark: Please refer to the picture, and pay attention to the one way valve direction, as there is a mark on the aluminum body which is showing the brake fluid flowing dirction, the direction of arrow on the valve should be away from the caliper
Step 3. Release and start press the brake Lever
3.1 Loose the brake bleeder Screw a little
3.2 Start pressing the brake Lever SLOWLY
3.3 Check until all air bubble has been flushed out
3.4 Make sure the fluid level in the mastercylinder reservoir is not too Low ,and fill
【Wide Application】: The Brake bleeder hose plays a vital role in the brake system. Our brake bleeder kit is suitable for bleeding brake fluid in cars, motorcycles, electric vehicles, etc. You don't have to worry about the brake maintenance of your vehicle.
Product Parameters
Material:
Aluminum(brake bleeder check valve)
Rubber(brake bleeder hose)
Size:
Total length: 19.7in / 500mm
Oil outlet tube length: 13.8in / 350mm
Oil outlet tube OD: 0.31in / 8mm
Oil outlet tube ID: 0.2in / 5mm
Oil inlet tube length: 5.9in / 150mm
Oil inlet tube OD: 0.2in / 5mm
Oil inlet tube ID: 0.14in / 3.5mm
Check valve length: 2.2in / 55mm
*Please check carefully whether the size is compatible before purchasing
Package includes:
1 x Oil outlet tube
1 x Oil inlet tube
1 x Check valve
3 x Clamp, 2 x Cap
🎁Package Includes
- 1 x Brake Bleeder Hose
❗Notes
- Due to manual measurements, please allow slight measurement deviations.
- Due to the different display and lighting effects, the actual color of the item may be slightly different from the color displayed on the picture.
OUR GUARANTEE:
- We believe we have some of the most innovative products in the world, and we want to make sure we back that up with a risk-free 30-day guarantee.
- If for any reason you do not have a positive experience, we will make every effort to ensure that you are satisfied with your purchase.
- We want you to rest assured that there is absolutely zero risk in buying and trying out products. If you don't like it and don't feel bad, we'll do it right.
- We email support. If you need help, please contact us.
